Consistency Check On Virtual Drives - Hitachi Compute Blade 500 Series User Manual

6 Controller Management > Change Controller Properties > Success
.
message appears .. With OK selected, press Enter.
7 Boot priority for the virtual drive is displayed. Then, Controller
.
Management window appears.

Consistency check on virtual drives

You need to execute consistency check using RAID utility, Hitachi RAID
Navigator or MegaRAID Storage Manager running on an OS.
See the MegaRAID Storage Manager Version xxx Instruction Manual in flash
memory embedded in the chassis or contained in Driver & Utility CD for
consistency check with RAID utility.
See the Hitachi Compute Blade Series Hitachi Compute Rack Series OS
Installation Guide for Windows Server or Hitachi Compute Blade 500 Series
OS Installation Guide for Red Hat Enterprise Linux in the flash memory
embedded in the server chassis for where they are.
Note:
• Consistency check can be executed with RAID 1 that has redundancy.
• When virtual drives are Degraded, consistency check cannot be executed.
You need to execute consistency check after recovery.
• When a virtual drive is in initialization, consistency check is not available.
Complete initialization before executing consistency check on the virtual
drive.
6-42
LSI Software RAID Configuration Utility for disk arrays
Hitachi Compute Blade 500 Series EFI User's Guide