Hitachi Compute Blade 500 Series User Manual page 464

Delete Volume
Deleting disk arrays
This section describes the procedure for deleting disk arrays.
Note: You need to back up necessary data before deleting a disk array. When
you delete a disk array, all data is lost from those disks.
1 Select RAID Properties in the main menu, and press Enter.
.
2 Select Delete Volume, and press Enter.
.
Note: Do not use other key functions unless instructed otherwise.
3 Press the Y key.
.
7-30
SAS configuration utility
Hitachi Compute Blade 500 Series EFI User's Guide