Hitachi Compute Blade 500 Series User Manual page 63

Menu items
Enable / Disable
Onboard Device(s)
Enable / Disable
Adapter Option ROM
Support
Set Option ROM
Execution Order
PCIe Gen1/Gen2/
Gen3 Speed Selection
Console Redirection
Settings
USB Configuration
Note:
1 A value in double angle brackets, << >>, shows the default.
.
USB Configuration
Select an item to display or set, and press Enter.
The following table shows description of menu items appeared in the left side
of the window
Menu items
Front Dongle USB Port #1
Front Dongle USB Port #2
Front USB3.0 Port
XHCI Mode
Note:
1 A value in double angle brackets, << >>, shows the default.
.
Memory sub menu
Select the item to display or set, and press Enter.
Hitachi Compute Blade 500 Series EFI User's Guide
1
Selection
- Enables or Disables onboard devices or slots.
- Controls Legacy and UEFI-compliant adapter
support, Disabling UEFI/Legacy support may
adversely affect preboot/boot functions.
- Control legacy ROM load order (overridden
by UEFI thunk drivers).
- Select this option to choose the
generation(Gen1/Gen2/Gen3 Speed)for
available PCIe slots.
- Settings for Console Redirection and COM
Port Settings.
- USB Configuration Settings.
See
Table 2-38 USB Configuration items
Selection
• Disable
• <<Enable>>
• Disable
• <<Enable>>
• Disable
• <<Enable>>
• Disable
• <<Auto>>
UEFI setup menu
Description
USB Configuration on page
1
Description
USB Configuration Settings.
USB Configuration Settings.
USB Configuration Settings.
Configures the mode of USB 3.0
controllers.
2-43.
2-43