Assembling The 30 Kw Device - Siemens sinamics dcp Operating Instructions Manual

Electrical connection
6.5 Additional system components
6.5.1.5

Assembling the 30 kW device

Image 6-13
● Loosen the screw
● Detach and remove the front plate
● Loosen the screws
● Pull out the electronics rack unit
● Push the CBE20 into the option module interface (see Image 6-14 Assembling the
CBE20 (Page 63))
● Reinsert the electronics unit
● Tighten the screws
● Attach the front plate
● Tighten the screw
62
Assembling the CBE20
①
③
④
④
③
again
②
again
③
again
②
Operating Instructions, 05/2016, A5E34382853K
SINAMICS DCP