Siemens sinamics dcp Operating Instructions Manual page 33

The customer must ensure that power cables are clamped nor further than 300 mm from
their termination.
Note
For cabinet designs with degree of protection greater than IP20, an additional fan is required
if the power rating is fully utilized. This fan must be designed for the "fan air flow" (seeDevice
data (Page 287)) of the device in question.
Image 5-3 120 kW device with mounted transport aid
The 120 kW device is delivered with 3 metal brackets, which are used as a transport aid (in
figure 5-3, shown in red). These have to be removed before mounting and disposed of as
scrap metal.
SINAMICS DCP
Operating Instructions, 05/2016, A5E34382853K
Mounting
33