Siemens sinamics dcp Operating Instructions Manual page 55

25 AI 0 + Analog input 0
AI 0 -
26
27 AI 1 + Analog input 1
AI 1 -
28
29 AI 2 + Analog input 2
AI 2 -
30
Reference voltage
31 P10 Reference voltage ±10 V
(output)
32 N10
33, 34 M Ground, analog
Terminals not used
35, 36 M Ground, digital
37 Not used
38 Not used
39 Not used
40 Not used
Terminals not used
41 Supply
42 Ground
43 Not used
44 Not used
45 Not used
46 Not used
47 Not used
48 Not used
Analog outputs (assignable outputs)
49 AO 0 Analog output 0
50 M Ground, analog
51 AO 1 Analog output 1
52 M Ground, analog
Connections for temperature sensors
53 Temp1
54 Temp2 (sense cable)
SINAMICS DCP
Operating Instructions, 05/2016, A5E34382853K
Parameterizable input type (signal type):
Differential input ±10 V; 150 kΩ
Current input 0 mA - 20 mA; 300 Ω or 4 mA - 20 mA; 300 Ω resolu-
tion approx. 0.66 mV (±14 bit)
Common-mode controllability: ±15 V
Input type (signal type):
- Differential input ±10 V; 150 kΩ
Resolution approx. 0.66 mV (±14 bits)
Common mode controllability ±15 V
Tolerance ±1% at 25° C Stability 0.1% per 10° K
10 mA short-circuit proof
+13.7 V to +15.2 V, 300 mA short-circuit proof
(electronically protected)
If overload occurs: Alarm A60018
±10 V, max. 2 mA short-circuit proof, resolution ±15 bits
Sensor according to P50490 (see SINAMICS DCP List Manual). The
cable to the temperature sensor must be shielded and connected to
Electrical connection
6.4 Terminals and connectors
55