Technical Data; Ambient Conditions; B.1 Ambient Conditions - Siemens sinamics dcp Operating Instructions Manual

Technical data

B.1

Ambient conditions

Environmental classes according to EN 60721-3
Table B- 1 Environmental classes
Usage Environmental condition
Operation Mechanical stability
Climatic influences
Biological influences
Chemical influences
Transporta- Mechanical stability
tion
Climatic influences
Biological influences
Chemical influences
Storage Mechanical stability
Climatic influences
Biological influences
Chemical influences
SINAMICS DCP
Operating Instructions, 05/2016, A5E34382853K
Environmental Remark
class
See
Vibration test according to EN 61800-5-1 (Table 27)
•
Remark
– Test: Fc test according to IEC 60068-2-6
– Motion: Sinusoidal
– 10 to 57 Hz: Amplitude = 0.075 mm
– 57 to 150 Hz: Acceleration = 1 g
– Duration of vibration: 10 cycles per axis
3K3
According to EN60721-3-3
•
Maximum surrounding air temperature: 0°C to +40°C (up
•
to + 55°C with Derating (Page 244))
No condensation, splash water or icing permitted.
•
3B1 -
3C1 -
2M1
Vibration test:
•
– 2 to 9 Hz: Amplitude = 3.5 mm
– 9 to 200 Hz: Acceleration = 10 m/s
2K3
According to EN60721-3-2
•
Surrounding air temperature:
•
– -25° C to +70° C
(briefly to -40° C for max. 24 h)
2B1 -
2C1 -
1M2
1K4
According to EN60721-3-1
•
Surrounding air temperature:
•
– -25° C to +55° C (temperature fluctuations <= 20 K / h)
Before commissioning, make sure that any condensation has
dried out.
1B1 -
1C1 -
B
2
285