Introduction - Siemens sinamics dcp Operating Instructions Manual

Introduction

The objective of these Operating Instructions is to convey know-how necessary to enable
instructed persons to operate the system professionally and safely.
Knowledge of the Operating Instructions and descriptions of the associated components is
required for all work on the various components. In case of doubt, request support from the
Siemens Customer Support.
Only appropriately trained and instructed personnel is permitted to operate the system.
These Operating Instructions are intended to inform and instruct defined target groups,
safeguard the manufacturer against liability, observe the product, provide traceability and
reproducibility, as well as the long-term or legally required archiving of the relevant
information content.
The individual sections of the Operating Instructions provide information about the product
itself, the handling of the product, and the actions of users.
This document includes safety information and the most important technical details of the
SINAMICS DCP.
Note
SINAMICS DCP is a member of the Sinamics family of devices. This series of devices
mainly comprises components for electric drives. This is the reason that in these operating
instructions in chapters which are applicable for several SINAMICS components (for
example PROFIBUS), the terms "Drive", "Master/leading drive", "Drive device" or "Drive
system" are used. In these operating instructions, "drive", "drive unit" or "drive system"
always refers to the SINAMICS DCP.
SINAMICS DCP
Operating Instructions, 05/2016, A5E34382853K
1
13