Information About Electromagnetic Fields - Siemens sinamics dcp Operating Instructions Manual

Safety notes
2.2 Notes on operator protection
2.2.1

Information about electromagnetic fields

Electromagnetic radiation during operation of the plant
Electromagnetic fields are generated during operation of electrical power engineering
equipment, such as transformers, converters, and motors.
Electromagnetic fields can interfere with electronic devices, which could cause them to
malfunction.
For example, the operation of heart pacemakers can be impaired, potentially leading to
damage to a person's health or even death. Steps must be taken, therefore, to ensure that
persons with heart pacemakers cannot enter these areas.
The plant operator is responsible for taking appropriate measures (labels and hazard
warnings) to adequately protect operating personnel and others against any possible risk.
● Observe the relevant nationally applicable health and safety regulations or the applicable
national regulations in the country of installation.
● Display adequate hazard warning notices on the installation.
● Place barriers around hazardous areas.
● Take measures, e.g. using shields, to reduce electromagnetic fields at their source.
● Make sure that personnel are wearing the appropriate protective gear.
20
WARNING
Operating Instructions, 05/2016, A5E34382853K
SINAMICS DCP