Operation; Basics; Parameters - Siemens sinamics dcp Operating Instructions Manual

Operation

8.1 Operation
8.1.1

Basics

8.1.1.1

Parameters

Parameter types
The following adjustable and display parameters are available:
● Adjustable parameters (can be written and read)
These parameters have a direct effect on how a function responds.
Example: Ramp-up and ramp-down time of the setpoint ramp
● Display parameters (can only be read)
These parameters are used to display internal variables.
Example: Current voltage on side 1 and side 2
Image 8-1
All these parameters can be read via PROFIBUS and changed by means of p parameters
using the mechanisms defined in the PROFIdrive profile.
SINAMICS DCP
Operating Instructions, 05/2016, A5E34382853K
Parameter types
8
107