7.3.1.3
Layout of the STARTER user interface
STARTER provides the following four operating areas:
Image 7-1
Operating area
①
Toolbars
②
Project navigator
③
Working area
④
Detail view
7.3.2
Procedure for commissioning with STARTER
7.3.2.1
Basic procedure when using STARTER
STARTER uses a series of interactive screens to enter the data required for the drive unit.
Note
The interactive screens are pre-assigned defaults that you need to adapt to your application
and configuration under certain circumstances.
This is intentional:
Objective: By taking time to consider what configuration data you enter, you can prevent
inconsistencies between the project data and drive unit data (identifiable in online mode).
SINAMICS DCP
Operating Instructions, 05/2016, A5E34382853K
STARTER operating areas
In this area, you can access frequently used functions by clicking icons.
The elements and objects contained in the project are displayed in this area.
Changes to the drive units are made in this area.
This area displays detailed information, for instance about faults and alarms.
7.3 Commissioning with the STARTER commissioning tool
Explanation
Commissioning
79