Siemens sinamics dcp Operating Instructions Manual page 82

Commissioning
7.3 Commissioning with the STARTER commissioning tool
Image 7-4
⇒ Enter a project name and, if necessary, the author, storage location and a comment.
⇒ Click Next > to set up the PG/PC interface.
Image 7-5
⇒ Click PG/PC... and set up the interface according to your device configuration.
The Properties..., Copy... and Select... buttons are available.
Set S7ONLINE as access point.
82
Creating a new project
Setting up the interface
Operating Instructions, 05/2016, A5E34382853K
SINAMICS DCP