Siemens sinamics dcp Operating Instructions Manual page 69

Terminal Function
X177_5
39, 40 RS485: RX+, RX-
"Cabinet Board" module
Note:
The terminals on X177_5 are connected in parallel to the terminals with the same name on the Terminal Module Cabinet
(TMC).
Open-loop and closed-loop control section
Table 6- 10 Terminal type, open-loop and closed-loop control section
X177, X177_5 (for option G63):
Type
Connection capacity
Stripped length
X177_1, X177_2 (for option G63):
Type
Connection capacity
X178, X179:
Type
Connection capacity
Stripped length
SINAMICS DCP
Operating Instructions, 05/2016, A5E34382853K
Receive cable +, -
SPT 1.5 spring-loaded terminal
Rigid/flexible/conductor sizes (mm
Flexible with end sleeve with/without plastic sleeve:
0.25-1.5 / 0.25-0.75 mm
2
10 mm
Two-tier terminal with spring-loaded terminal PK 68
Rigid/flexible 0.5-2.5 mm
2
FMC 1.5 plug-in terminal
Rigid/flexible/conductor sizes (mm
Flexible with end sleeve with/without plastic sleeve: 0.25-1.5 / 0.25-0.75 mm
10 mm
Description
See X177.39 and 40
/mm /AWG): 0.2-1.5 / 0.2-1.5 / 24-16
2 2
(stripped length 8 mm)
/mm /AWG): 0.2-1.5 / 0.2-1.5 / 24-16
2 2
Electrical connection
6.5 Additional system components
2
69