Siemens sinamics dcp Operating Instructions Manual page 198

Operation
8.6 Communication via PROFINET IO
In the dialog screen that appears next, enter a freely selectable device name, the IP address
and the subnet mask.
The subnet masks must match before STARTER can be operated.
Image 8-45
After selecting the "Assign name" button, the following confirmation will appear if the
assignment was successful: In certain cases, a RAM to ROM is executed in the drive and
you must wait until it has been completed.
Image 8-46
After selecting the "Assign IP configuration" button, the following confirmation will appear if
the assignment was successful: In certain cases, a RAM to ROM is executed in the drive
and you must wait until it has been completed.
198
STARTER - Edit EtherNet node
STARTER - Successful assignment of the device name
Operating Instructions, 05/2016, A5E34382853K
SINAMICS DCP