Replacing The Fans For The 120 Kw Device - Siemens sinamics dcp Operating Instructions Manual

9.2.2

Replacing the fans for the 120 kW device

Image 9-2
● Release the 2 screws at the lower side of the device and remove the front panel
● Unplug connector
● Loosen the screw
● Replace the fan unit
● Tighten the screw
● Plug the connector
● Re-attach the front panel and tighten the 2 screws at the lower side of the device
SINAMICS DCP
Operating Instructions, 05/2016, A5E34382853K
Replacing the fan of a 120 kW device
①
②
②
①
in
Servicing
9.2 Replacing the fans
277