Preface; Description - Siemens sinamics dcp Operating Instructions Manual

Preface

Device software version
When these Operating Instructions went to print, SINAMICS DCP units were being supplied
from the factory with the software release specified on Page 3. However, these Operating
Instructions can, in principle, also apply to other software versions.
● Older software versions
It is possible that not all of the functions described here may be available.
● Newer software versions
It is possible that the SINAMICS DCP may feature additional functions that are not
described in these Operating Instructions. Do not change any parameters that you cannot
find in the List Manual from their factory setting, and do not give parameters any values
that are not specified in the List Manual.
The software release is displayed using r50060[6].
Example:
01010203 displayed on the BOP20 means 01.01.02.03 → Version 1.1, Service Pack 2,
Hotfix 3
Downloading the latest software version
(https://support.industry.siemens.com/cs/ww/en/view/109474935)
SINAMICS DCP documentation available
SINAMICS DCP Operating Instructions
Contains all information on
ordering, installation, connecting, commissioning, maintaining, description of functions,
and service
SINAMICS DCP List Manual
Contains
parameter list, function diagrams, list of faults and alarms
SINAMICS Free Function Blocks, Commissioning Manual
Contains a general description, the list of parameters, the function diagrams as well as
the list of faults and alarms.
SINAMICS DCP DVD Documentation
Contains, among others:
• All the manuals mentioned above in all the available languages
• The function diagrams in VISIO format
SINAMICS DCP
Operating Instructions, 05/2016, A5E34382853K
5