Cleaning Blade Replacement - Ricoh FW830 Service Manual

31 December 1992
6. CLEANING
6.1

CLEANING BLADE REPLACEMENT

[A]
1. Remove the drum. (See Drum Replacement.)
NOTE: Cover the drum with paper to prevent the drum from being exposed
to light.
2. Place a sheet of A1 size (D size) paper [A] on the paper transport section.
3. Pull up on the plate spring [B] and remove the cleaning blade [C].
4. Pull the cleaning blade release lever.
5. Install the new blade.
[C]
5-41
CLEANING
[B]