WEC8500/8050 Operation Manual
[ip igmp snooping mroute]
This command enables or disables the Mroute function.
ip igmp snooping mroute [INTERFACE]
no ip igmp snooping mroute [INTERFACE]
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller> <Multicast> <IGMP Snooping> menu in the sub-menus.
[Config]
Enables or disables the IGMP Snooping function or configures related functions.
To perform configuration for STATE, FAST LEAVE, QUERIER STATE, or REPORT
SUPRESSION STATE, select Enable or Disable and click the <Apply> button.
[Mroute]
The PIM-SM initial window is shown below. When you click the <Add> or <Delete>
button, you can add or delete PIM-SM configuration.
1) In the PIM-SM initial window, click the <Add> button.
Samsung Electronics America
Figure 50. IGMP Snooping Config Window
Figure 51. IGMP Snooping Mroute Creation Window (1)
Version 5.2
page 126 of 533