Lacp System-Priority - Allied Telesis AT-AR3050S Command Reference Manual

L A C
INK GGREGATION OMMANDS
-
LACP SYSTEM PRIORITY

lacp system-priority

Overview Use this command to set the system priority of a local system. This is used in
determining the system responsible for resolving conflicts in the choice of
aggregation groups.
Use the no variant of this command to reset the system priority of the local system
to the default.
lacp system-priority <1-65535>
Syntax
no lacp system-priority
Default The default is 32768.
Mode Global Configuration
Example awplus#
awplus(config)#
C613-50077-01 REV A
Parameter Description
<1-65535>
LACP system priority. Lower numerical values have higher priorities.
configure terminal
lacp system-priority 6700
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
526