Clear Ipv6 Rip Route - Allied Telesis AT-AR3050S Command Reference Manual

RIP IP 6 C
NG FOR V OMMANDS
6
CLEAR IPV RIP ROUTE

clear ipv6 rip route

Overview Use this command to clear specific data from the RIPng routing table.
clear ipv6 rip route
Syntax
{<ipv6-addr/prefix-length>|all|connected|rip|static|ospf}
Mode Privileged Exec
Example awplus#
awplus#
C613-50077-01 REV A
Parameter Description
<ipv6-addr/
Specify the IPv6 Address in format X:X::X:X/Prefix-Length.
prefix-length>
The prefix-length is a decimal integer between 1 and 128.
Removes entries which exactly match this destination address
from the RIPng routing table.
connected
Removes redistributed connected entries from RIPng routing
table.
static
Removes redistributed static entries from the RIPng routing
table.
rip
Removes RIPng routes from the RIPng routing table.
ospf
Removes redistributed OSPFv3 routes from the RIPng routing
table.
all
Clears the entire RIPng routing table.
clear ipv6 rip route all
clear ipv6 rip route 2001:db8::/32
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
712