Show Ip Ospf Neighbor - Allied Telesis AT-AR3050S Command Reference Manual

OSPF C
OMMANDS

SHOW IP OSPF NEIGHBOR

show ip ospf neighbor
Overview Use this command to display information on OSPF neighbors. Include the ospf-id
parameter with this command to display information about specified instances.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
show ip ospf [<ospf-id>] neighbor <neighbor-ip-addr> [detail]
Syntax
show ip ospf [<ospf-id>] neighbor detail [all]
show ip ospf [<ospf-id>] neighbor [all]
show ip ospf [<ospf-id>] neighbor interface <ip-addr>
Mode User Exec and Privileged Exec
Examples awplus#
awplus#
awplus#
Output Note that before a device enters OSPF Graceful Restart it first informs its OSPF
neighbors. In the show output, the * symbol beside the Dead Time parameter
indicates that the device has been notified of a neighbor entering the graceful
restart state, as shown in the figures below.
Figure 20-18: Example output from the show ip ospf neighbor command
OSPF process 1:
Neighbor ID Pri
10.10.10.50
OSPF process 100:
Neighbor ID Pri
10.10.11.50
awplus#show ip ospf 1 neighbor
OSPF process 1:
Neighbor ID Pri
10.10.10.50
C613-50077-01 REV A
Guide.
Parameter
<ospf-id>
<neighbor-ip-addr>
all
detail
<ip-addr>
show ip ospf neighbor detail
show ip ospf neighbor 1.2.3.4
show ip ospf neighbor interface 10.10.10.50 detail all
State
1 Full/DR
State
1 Full/Backup
State
1 Full/DR
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
"Getting Started with AlliedWare Plus" Feature Overview
Description
<0-65535> The ID of the router process for which
information will be displayed.
The Neighbor ID, entered as an IP address.
Include downstatus neighbor.
Detail of all neighbors.
IP address of the interface.
Dead Time Address
00:00:38 10.10.10.50
Dead Time Address
00:00:31 10.10.11.50
Dead Time Address
00:00:38* 10.10.10.50
Interface
vlan1
Interface
vlan2
Interface
vlan1
826