Bgp And Bgp4+ Commands; Introduction - Allied Telesis AT-AR3050S Command Reference Manual

22

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
the Border Gateway Protocol for IPv4 (BGP) and for IPv6 (BGP4+).
For basic BGP and BGP4+ introduction information and configuration examples,
see the
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50077-01 REV A
BGP and BGP4+
BGP Feature Overview and Configuration
"address-family" on page 940
"aggregate-address" on page 941
"auto-summary (BGP only)" on page 944
"bgp aggregate-nexthop-check" on page 945
"bgp always-compare-med" on page 946
"bgp bestpath as-path
"bgp bestpath compare-confed-aspath" on page 948
"bgp bestpath compare-routerid" on page 949
"bgp bestpath med" on page 950
"bgp bestpath med remove-recv-med" on page 952
"bgp bestpath med remove-send-med" on page 953
"bgp client-to-client reflection" on page 954
"bgp cluster-id" on page 955
"bgp confederation identifier" on page 957
"bgp confederation peers" on page 958
"bgp config-type" on page 960
"bgp dampening" on page 962
"bgp damp-peer-oscillation (BGP
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Commands
Guide.
ignore" on page 947
only)" on page 964
934