Ip Rip Send Version 1-Compatible - Allied Telesis AT-AR3050S Command Reference Manual

RIP C
OMMANDS
1-
IP RIP SEND VERSION COMPATIBLE

ip rip send version 1-compatible

Overview Use this command in Interface Configuration mode to send RIP version 1
compatible packets from a RIP version 2 interfaces to other RIP Interfaces. This
mechanism causes RIP version 2 interfaces to send broadcast packets instead of
multicasting packets, and is used in environments where multicast is not enabled
or where hosts do not listen to multicast.
Use the no variant of this command to use the setting specified by the
command, and disable the broadcast of RIP version 2 packets that are sent as
broadcast packets.
ip rip send version 1-compatible
Syntax
no ip rip send version
Default RIP version 2 is enabled by default.
Mode Interface Configuration for a VLAN interface or a PPP interface.
Usage This command applies to a specific interface and overrides the version specified by
the
RIP can be run in version 1 compatible mode. Version 2 has more features than
version 1; in particular RIP version 2 supports authentication and classless routing.
Once the RIP version is set, RIP packets of that version will be received and sent on
all the RIP-enabled interfaces.
Use the
multicast packets. For example, in environments where multicast is enabled and
where hosts listen to multicast.
In the following example, the VLAN interface vlan2 is configured to send RIP
Examples
version 1- compatible packets.
awplus#
awplus(config)#
awplus(config-if)#
In the following example, the VLAN interface vlan3 is configured to use the RIP
version specified by the
awplus#
awplus(config)#
awplus(config-if)#
C613-50077-01 REV A
Parameter Description
1-compatible
Specify this parameter to send RIP version 1 compatible packets
from a version 2 RIP interface to other RIP interfaces.
This mechanism causes version 2 RIP interfaces to broadcast
packets instead of multicasting packets.
version (RIP) command.
ip rip send version
configure terminal
interface vlan2
configure terminal
interface vlan3
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
command in an environment where you can send
ip rip send version 1-compatible
version (RIP) command.
no ip rip send version
version (RIP)
682