Ospf Commands; Introduction; Chapter 20: Ospf Commands - Allied Telesis AT-AR3050S Command Reference Manual

20

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
OSPF. For more information, see the
Guide.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50077-01 REV A

OSPF Commands

"area default-cost" on page 738
"area authentication" on page 739
"area filter-list" on page 740
"area nssa" on page 741
"area range" on page 743
"area stub" on page 745
"area virtual-link" on page 746
"auto-cost reference bandwidth" on page 749
"bandwidth" on page 751
"capability opaque" on page 752
"capability restart" on page 753
"clear ip ospf process" on page 754
"compatible rfc1583" on page 755
"debug ospf events" on page 756
"debug ospf ifsm" on page 757
"debug ospf lsa" on page 758
"debug ospf nfsm" on page 759
"debug ospf nsm" on page 760
"debug ospf packet" on page 761
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
OSPF Feature Overview and Configuration
735