Clear Ip Bgp (Asn) (Bgp Only) - Allied Telesis AT-AR3050S Command Reference Manual

BGP BGP4+ C
AND OMMANDS
(ASN) (BGP
CLEAR IP BGP ONLY

clear ip bgp (ASN) (BGP only)

Overview Use this command to reset the BGP connections to all peers in a specified
Autonomous System Number (ASN).
clear ip bgp <asn> [in [prefix-filter]|out|soft [in|out]]
Syntax
clear ip bgp <asn> ipv4
clear ip bgp <asn> ipv4 in [prefix-filter]
clear ip bgp <asn> ipv4 out
clear ip bgp <asn> ipv4 soft [in|out]
Mode Privileged Exec
Examples awplus#
C613-50077-01 REV A
)
Parameter Description
<asn>
<1-4294967295>
Specifies the ASN for which all routes will be cleared.
ipv4
Clears all IPv4 address family peers. Configure parameters relating
to the BGP exchange of IPv4 prefixes.
in
Indicates that incoming advertised routes will be cleared.
prefix-filte
Specifies that a prefix-list will be sent, by the ORF mechanism, to
r
those neighbors with which the ORF capability has been
negotiated. The neighbors will be triggered to resend updates,
which match the prefix-list filter, to the local router. The local router
will then perform a soft reconfiguration.
out
Indicates that outgoing advertised routes will be cleared.
soft in
Soft inbound reset causes the neighbors to resend all their updates
to the local device, without resetting the connection or clearing
the entries in the local device. So, the local device stores new
updates, and uses them to systematically replace existing table
entries. This process can use a considerable amount of memory.
soft out
Soft outbound reset causes the device to simply resend all its
updates to the specified neighbor(s), without resetting the
connection, or clearing table entries.
clear ip bgp 100
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
995