Enable Db-Summary-Opt - Allied Telesis AT-AR3050S Command Reference Manual

OSPF C
OMMANDS
- -
ENABLE DB SUMMARY OPT

enable db-summary-opt

Overview This command enables OSPF database summary list optimization.
The no variant of this command disables database summary list optimization.
Syntax enable db-summary-opt
no enable db-summary-opt
Default The default setting is disabled.
Mode Router Configuration
Usage When this feature is enabled, the database exchange process is optimized by
removing the LSA from the database summary list for the neighbor, if the LSA
instance in the database summary list is the same as, or less recent than, the listed
LSA in the database description packet received from the neighbor.
Examples To enable OSPF database summary list optimization, use the commands:
awplus#
awplus(config)#
awplus(config-router)#
To disable OSPF database summary list optimization, use the commands:
awplus#
awplus(config)#
awplus(config-router)#
Validation show running-config
Commands
C613-50077-01 REV A
configure terminal
router ospf
enable db-summary-opt
configure terminal
router ospf
no enable db-summary-opt
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
767