Ip Dns Forwarding Retry - Allied Telesis AT-AR3050S Command Reference Manual

IP A P
DDRESSING AND ROTOCOL

IP DNS FORWARDING RETRY

ip dns forwarding retry
Overview Use this command to set the number of times DNS Relay will retry to forward DNS
queries. The device stops sending DNS requests to an unresponsive server at the
time set using the
retries are used.
Use the no variant of this command to set the number of retries to the default of 2.
ip dns forwarding retry <0-100>
Syntax
no ip dns forwarding retry
Default The default number of retries is 2 DNS requests to an unresponsive server.
Mode Global Configuration
Usage See the
DNS Relay. See the
command.
To set the DNS forwarding retry count to 50 and to set the DNS forwarding
Examples
dead-time to 1800 seconds, use the commands:
awplus#
awplus(config)#
awplus(config)#
To reset the DNS retry count to the default of 2 and the DNS forwarding dead-time
to the default of 3600 seconds, use the commands:
awplus#
awplus(config)#
awplus(config)#
Related debug ip dns forwarding
Commands
ip dns forwarding
ip dns forwarding dead-time
show ip dns forwarding
C613-50077-01 REV A
C
OMMANDS
ip dns forwarding dead-time
IP Feature Overview and Configuration Guide
ip dns forwarding dead-time
configure terminal
ip dns forwarding retry 50
ip dns forwarding dead-time 1800
configure terminal
no ip dns forwarding retry
no ip dns forwarding dead-time
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
command and when all of the
for more information about
command used with this
567