Allied Telesis AT-AR3050S Command Reference Manual page 299

P C C
LUGGABLES AND ABLING OMMANDS
SHOW SYSTEM PLUGGABLE DETAIL
Table 7: Parameters in the output from the show system pluggables detail
C613-50077-01 REV A
command:
Parameter
Port
Vendor Name
Device Name
Device Revision
Device Type
Serial Number
Manufacturing
Datecode
SFP Laser Wavelength
Single Mode Fiber
OM1 (62.5um) Fiber
OM2 (50um) Fiber
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Description
Specifies the port the pluggable transceiver is installed in.
Specifies the vendor's name for the installed pluggable
transceiver.
Specifies the device name for the installed pluggable
transceiver.
Specifies the hardware revision code for the pluggable
transceiver. This may be useful for troubleshooting because
different devices may support different pluggable
transceiver revisions.
Specifies the device type for the installed pluggable
transceiver..
Specifies the serial number for the installed pluggable
transceiver.
Specifies the manufacturing datecode for the installed
pluggable transceiver. Checking the manufacturing
datecode with the vendor may be useful when
determining Laser Diode aging issues. For more
information, see "How To Troubleshoot Fiber and
Pluggable Issues" in the "Getting Started with AlliedWare
Plus" Feature Overview and Configuration
Specifies the laser wavelength of the installed pluggable
transceiver.
Specifies the link length supported by the pluggable
transceiver using single mode fiber.
Specifies the link length (in μm - micron) supported by the
pluggable transceiver using 62.5 micron multi-mode fiber.
Specifies the link length (in μm - micron) supported by the
pluggable transceiver using 50 micron multi-mode fiber.
Guide.
299