Allied Telesis AT-AR3050S Command Reference Manual page 718

RIP IP 6 C
NG FOR V OMMANDS
6 -
IPV RIP METRIC OFFSET
Examples To increment the metric-offset on the VLAN interface vlan2, enter the below
commands:
awplus#
awplus(config)#
awplus(config-router)#
awplus(config)#
awplus(config-if)#
To reset the metric-offset on the VLAN interface vlan2 to the default value, enter
the below commands:
awplus#
awplus(config)#
awplus(config-if)#
To increment the metric-offset on the PPP interface ppp0, enter the below
commands:
awplus#
awplus(config)#
awplus(config-router)#
awplus(config)#
awplus(config-if)#
To reset the metric-offset on the PPP interface ppp0 to the default value, enter the
below commands:
awplus#
awplus(config)#
awplus(config-if)#
Validation show running-config
Commands
Related default-metric (IPv6 RIPng)
Commands
C613-50077-01 REV A
configure terminal
router ipv6 rip
exit
interface vlan2
ipv6 rip metric-offset 1
configure terminal
interface vlan2
no ipv6 rip metric-offset 1
configure terminal
router ipv6 rip
exit
interface ppp0
ipv6 rip metric-offset
configure terminal
interface ppp0
no ipv6 router rip
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
718