Show Spanning-Tree Statistics Interface - Allied Telesis AT-AR3050S Command Reference Manual

S T C
PANNING REE OMMANDS
-
SHOW SPANNING TREE STATISTICS INTERFACE

show spanning-tree statistics interface

Overview This command displays BPDU (Bridge Protocol Data Unit) statistics for the specified
switch port, and all MST instances associated with that switch port.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
show spanning-tree statistics interface <port>
Syntax
Mode Privileged Exec
To display BPDU statistics about each MST instance for port1.0.4, use the
Example
command:
awplus#
Output Figure 13-16: Example output from show spanning-tree statistics interface

awplus#show spanning-tree statistics interface port1.0.2

Port number = 906 Interface = port1.0.2
================================
% BPDU Related Parameters
% -----------------------
% Port Spanning Tree
% Spanning Tree Type
% Current Port State
% Port ID
% Port Number
% Path Cost
% Message Age
% Designated Root
% Designated Cost
% Designated Bridge
% Designated Port Id
% Top Change Ack
% Config Pending
C613-50077-01 REV A
Guide.
Parameter Description
<port>
The port to display information about. The port may be a switch port
(e.g. port1.0.4), a static channel group (e.g. sa2), or a dynamic
(LACP) channel group (e.g. po2).
show spanning-tree statistics interface port1.0.4
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
"Getting Started with AlliedWare Plus" Feature Overview
: Disable
: Multiple Spanning Tree Protocol
: Discarding
: 838a
: 38a
: 20000000
: 0
: ec:cd:6d:20:c0:ed
: 0
: ec:cd:6d:20:c0:ed
: 838a
: FALSE
: FALSE
479