Copy (Filename) - Allied Telesis AT-AR3050S Command Reference Manual

F M C
ILE ANAGEMENT OMMANDS
( )
COPY FILENAME

copy (filename)

Overview This command copies a file. This allows you to:
•
•
•
•
copy <source-name> <destination-name>
Syntax
Mode Privileged Exec
To use TFTP to copy the file bob.key into the current directory from the remote
Examples
server at 10.0.0.1, use the command:
awplus#
To use SFTP to copy the file new.cfg into the current directory from a remote
server at 10.0.1.2, use the command:
awplus#
To use SCP with the username beth to copy the file old.cfg into the directory
config_files on a remote server that is listening on TCP port 2000, use the
command:
awplus#
To copy the file newconfig.cfg onto your device's Flash from a USB storage
device, use the command:
awplus#
To copy the file newconfig.cfg to an SD (or SDHC) Card from your device's
Flash, use the command:
awplus#
To copy the file newconfig.cfg to a USB storage device from your device's
Flash, use the command:
awplus#
C613-50077-01 REV A
copy files from your device to a remote device
copy files from a remote device to your device
copy files stored on Flash memory to or from a different memory type, such
as a USB storage device
create two copies of the same file on your device
Parameter
<source-name>
<destination-name>
copy tftp://10.0.0.1/bob.key bob.key
copy sftp://10.0.1.2/new.cfg bob.key
copy scp://beth@serv:2000/config_files/old.cfg old.cfg
copy usb:/newconfig.cfg flash:/newconfig.cfg
copy flash:/newconfig.cfg card:/newconfig.cfg
copy flash:/newconfig.cfg usb:/newconfig.cfg
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Description
The filename and path of the source file. See
on page 96 for valid syntax.
The filename and path for the destination file. See
Introduction on page 96 for valid syntax.
Introduction
108