Show Vlan - Allied Telesis AT-AR3050S Command Reference Manual

VLAN C
OMMANDS

SHOW VLAN

show vlan
Overview Use this command to display information about a particular VLAN by specifying
the VLAN ID. It displays information for all the VLANs configured.
show vlan {all|brief|dynamic|static|auto|static-ports<1-4094>}
Syntax
Mode User Exec and Privileged Exec
Example To display information about VLAN 2, use the command:
awplus#
Output Figure 12-2: Example output from the show vlan command
VLAN ID Name
======= ================ ======= ======= ====================================
2 VLAN0002
...
Related vlan
Commands
C613-50077-01 REV A
Parameter
<1-4094>
all
brief
dynamic
static
auto
static- ports
show vlan 2
Type State
STATIC ACTIVE
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Description
Display information about the VLAN specified by the VLAN ID.
Display information about all VLANs on the device.
Display information about all VLANs on the device.
Display information about all VLANs learned dynamically.
Display information about all statically configured VLANs.
Display information about all auto-configured VLANs.
Display static egress/forbidden ports.
Member ports
(u)-Untagged, (t)-Tagged
port1.0.3(u) port1.0.4(u) port1.0.5(u)
port1.0.6(u)
433