Clear Bgp Peer-Group - Allied Telesis AT-AR3050S Command Reference Manual

BGP BGP4+ C
AND OMMANDS
-
CLEAR BGP PEER GROUP

clear bgp peer-group

Overview Use this command to reset the BGP and BGP4+ connections for all members of a
peer group.
clear bgp peer-group <peer-group> [in [prefix-filter]|out|soft
Syntax
[in|out]]
Mode Privileged Exec
awplus#
Examples
awplus#
C613-50077-01 REV A
Parameter Description
peer-group
Clears all members of a peer group.
<peer-group>
Name of the BGP peer group
in
Indicates that incoming advertised routes will be cleared.
prefix-filter
Specifies that a prefix-list will be sent, by the ORF mechanism, to
those neighbors with which the ORF capability has been
negotiated. The neighbors will be triggered to resend updates,
which match the prefix-list filter, to the local router. The local
router will then perform a soft reconfiguration.
out
Indicates that outgoing advertised routes will be cleared.
soft in
Soft inbound reset causes the neighbors to resend all their
updates to the local device, without resetting the connection or
clearing the entries in the local device. So, the local device stores
new updates, and uses them to systematically replace existing
table entries. This process can use a considerable amount of
memory.
soft out
Soft outbound reset causes the device to simply resend all its
updates to the specified neighbor(s), without resetting the
connection, or clearing table entries.
clear bgp peer-group P1 soft in
clear bgp peer-group P2 in
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
990