Show Ip Ospf Database Opaque-Area - Allied Telesis AT-AR3050S Command Reference Manual

OSPF C
OMMANDS
SHOW IP OSPF DATABASE OPAQUE

show ip ospf database opaque-area

Overview Use this command to display information about the area-local (link state type 10)
scope LSAs. Type-10 Opaque LSAs are not flooded beyond the borders of their
associated area.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
show ip ospf database opaque-area [<ip-address>]
Syntax
[self-originate|<advrouter>]
Mode User Exec and Privileged Exec
awplus#
Examples
self-originate
awplus#
awplus#
2.3.4.5
Output Figure 20-10: Example output from the show ip ospf database opaque-area
C613-50077-01 REV A
-
AREA
Guide.
Parameter Description
<advrouter> adv-router <ip-address>
adv-router
Displays all the LSAs of the specified router.
<ip-address>
A link state ID, as an IP address.
self-originate Displays self-originated link states.
show ip ospf database opaque-area 1.2.3.4
show ip ospf database opaque-area self-originate
show ip ospf database opaque-area 1.2.3.4 adv-router
command
OSPF Router process 100 with ID (10.10.11.50)
Area-Local Opaque-LSA (Area 0.0.0.0)
LS age: 262
Options: 0x2 (*|-|-|-|-|-|E|-)
LS Type: Area-Local Opaque-LSA
Link State ID: 10.0.25.176 (Area-Local Opaque-Type/ID)
Opaque Type: 10
Opaque ID: 6576
Advertising Router: 10.10.11.50
LS Seq Number: 80000001
Checksum: 0xb413
Length: 26
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
"Getting Started with AlliedWare Plus" Feature Overview
817