Ip Forward-Protocol Udp - Allied Telesis AT-AR3050S Command Reference Manual

IP A P
DDRESSING AND ROTOCOL
-
IP FORWARD PROTOCOL UDP

ip forward-protocol udp

Overview This command enables you to control which UDP broadcasts will be forwarded to
the helper address(es). A UDP broadcast will only be forwarded if the destination
UDP port number in the packet matches one of the port numbers specified using
this command.
Refer to the IANA site (www.iana.org) for a list of assigned UDP port numbers for
protocols to forward using ip forward-protocol udp.
Use the no variant of this command to remove a port number from the list of
destination port numbers that are used as the criterion for deciding if a given UDP
broadcast should be forwarded to the IP helper address(es).
ip forward-protocol udp <port>
Syntax
no ip forward-protocol udp <port>
Default The ip forward-protocol udp command is not enabled by default.
Mode Global Configuration
Usage Combined with the
forward-protocol udp command in Global Configuration mode allows control of
which protocols (destination port numbers) are forwarded. The ip
forward-protocol udp command configures protocols for forwarding, and the ip
helper-address command configures the destination address(es).
NOTE
The types of UDP broadcast packets that the device will forward are ONLY those
specified by the ip forward-protocol command(s). There are no other UDP packet
types that the IP helper process forwards by default.
Examples To configure forwarding of packets on a UDP port, use the following commands:
awplus#
awplus(config)#
To delete a UDP port from the UDP ports that the device forwards, use the
following commands:
awplus#
awplus(config)#
Validation show running-config
Commands
Related ip helper-address
Commands
ip directed-broadcast
C613-50077-01 REV A
C
OMMANDS
ip helper-address
:
configure terminal
ip forward-protocol udp <port>
configure terminal
no ip forward-protocol udp <port>
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
command in interface mode, the ip
573