Send-Lifetime - Allied Telesis AT-AR3050S Command Reference Manual

RIP C
OMMANDS
-
SEND LIFETIME

send-lifetime

Overview Use this command to specify the time period during which the authentication key
on a key chain can be sent.
send-lifetime <start-date>{<end-date>|duration
Syntax
<seconds>|infinite}
no send-lifetime
Mode Keychain-key Configuration
The following example shows the setting of send-lifetime for key1 on the key
Example
chain named mychain.
awplus#
awplus(config)#
awplus(config-keychain)#
awplus(config-keychain-key)#
04:04:02 Dec 6 2006
C613-50077-01 REV A
Parameter Description
<start-date>
Specifies the start period - time and date in the format DD MMM
YYYY or MMM DD YYYY:
<hh:mm:ss>{<day> <month> <year> | <month> <day> <year>}
<hh:mm:ss>
<day>
<month>
<year>
<end-date>
Specifies the end period - time and date in the format DD MMM
YYYY or MMM DD YYYY:
<hh:mm:ss>{<day> <month> <year> | <month> <day> <year>}
<hh:mm:ss>
<day>
<month>
<year>
<seconds> <1-2147483646> Duration of the key in seconds.
infinite
Never expires.
configure terminal
key chain mychain
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Time of the day when send-lifetime starts, in
hours, minutes and seconds
<1-31> Specifies the day of the month to start.
Specifies the month of the year to start (the first
three letters of the month, for example, Jan).
<1993-2035> Specifies the year to start.
Time of the day when lifetime expires, in hours,
minutes and seconds.
<1-31> Specifies the day of the month to
expire.
Specifies the month of the year to expire (the
first three letters of the month, for example,
Feb).
<1993-2035> Specifies the year to expire.
key 1
send-lifetime 03:03:01 Jan 3 2004
698