Allied Telesis AT-AR3050S Command Reference Manual page 652

R C
OUTING OMMANDS
SHOW IP ROUTE DATABASE
Output Figure 17-2: Example output from the show ip route database command

Codes: C - connected, S - static, R - RIP
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
> - selected route, * - FIB route, p - stale info

O
*> 9.9.9.9/32 [110/31] via 10.10.31.16, vlan2, 00:19:21
O
10.10.31.0/24 [110/1] is directly connected, vlan2, 00:28:20
C *> 10.10.31.0/24 is directly connected, vlan2
S *> 10.10.34.0/24 [1/0] via 10.10.31.16, vlan2
O
10.10.34.0/24 [110/31] via 10.10.31.16, vlan2, 00:21:19
O
*> 10.10.37.0/24 [110/11] via 10.10.31.16, vlan2, 00:21:19
C *> 10.30.0.0/24 is directly connected, vlan6
S *> 11.22.11.0/24 [1/0] via 10.10.31.16, vlan2
O
E2 *> 14.5.1.0/24 [110/20] via 10.10.31.16, vlan2, 00:19:21
O
16.16.16.16/32 [110/11] via 10.10.31.16, vlan2, 00:21:19
S *> 16.16.16.16/32 [1/0] via 10.10.31.16, vlan2
O
*> 17.17.17.17/32 [110/31] via 10.10.31.16, vlan2, 00:21:19
C *> 45.45.45.45/32 is directly connected, lo
O
*> 55.55.55.55/32 [110/21] via 10.10.31.16, vlan2, 00:21:19
C *> 127.0.0.0/8 is directly connected, lo
The routes added to the FIB are marked with a *. When multiple routes are
available for the same prefix, the best route is indicated with the > symbol. All
unselected routes have neither the * nor the > symbol.
These route entries denote:
•
•
If the static route becomes unavailable, then the device automatically selects the
OSPF route and installs it in the FIB.
Related maximum-paths
Commands
show ip route
C613-50077-01 REV A
S *> 10.10.34.0/24 [1/0] via 10.10.31.16, vlan2
O 10.10.34.0/24 [110/31] via 10.10.31.16, vlan2, 00:21:19
The same prefix was learned from OSPF and from static route configuration.
Since this static route has a lower administrative distance than the OSPF
route (110), the static route (1) is selected and installed in the FIB.
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
O - OSPF, IA - OSPF inter area
652