Key Chain - Allied Telesis AT-AR3050S Command Reference Manual

RIP C
OMMANDS

KEY CHAIN

key chain
Overview Use this command to enter the key chain management mode and to configure a
key chain with a key chain name.
Use the no variant of this command to remove the key chain and all configured
keys.
Syntax key chain <key-chain-name>
no key chain <key-chain-name>
Mode Global Configuration
Usage This command allows you to enter the keychain mode from which you can specify
keys on this key chain.
The following example shows the creation of a key chain named mychain and the
Example
change into keychain mode prompt.
awplus#
awplus(config)#
awplus(config-keychain)#
Related key
Commands
key-string
accept-lifetime
send-lifetime
C613-50077-01 REV A
Parameter
<key-chain-name>
configure terminal
key chain mychain
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Description
Specify the name of the key chain to manage.
686