Bgp Bestpath Compare-Routerid - Allied Telesis AT-AR3050S Command Reference Manual

BGP BGP4+ C
AND OMMANDS
-
BGP BESTPATH COMPARE ROUTERID

bgp bestpath compare-routerid

Overview By default, when comparing similar routes from peers, BGP does not consider the
router ID of neighbors advertising the routes - BGP simply selects the first received
route. Use this command to include router ID in the selection process; similar
routes are compared and the route with the lowest router ID is selected.
The no variant of this command disables this feature, and returns the device to the
default state, where the device ignores the router ID in the BGP best path selection
process.
bgp bestpath compare-routerid
Syntax
no bgp bestpath compare-routerid
Mode Router Configuration
awplus#
Example
awplus(config)#
awplus(config-router)#
Related show ip bgp (BGP only)
Commands
show bgp ipv6 neighbors (BGP4+ only)
C613-50077-01 REV A
configure terminal
router bgp 100
bgp bestpath compare-routerid
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
949