Allied Telesis AT-AR3050S Command Reference Manual page 540

L A C
INK GGREGATION OMMANDS
- -
STATIC CHANNEL GROUP
To reference the static channel group 2 as an interface, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
awplus(config)#
awplus(config-if)#
To make it possible to use QoS Storm Protection on static channel group 2, with an
ACL named test-acl, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
Related show static-channel-group
Commands
C613-50077-01 REV A
configure terminal
interface port1.0.6
static-channel-group 2
exit
interface port.1.0.8
static-channel-group 2
exit
interface sa2
configure terminal
interface port1.0.6
static-channel-group 2 member-filters
access-group test-acl
exit
interface port.1.0.8
static-channel-group 2 member-filters
access-group test-acl
exit
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
540