Show Debugging Ipv6 Ospf - Allied Telesis AT-AR3050S Command Reference Manual

OSPF 3 IP 6 C
V FOR V OMMANDS
6
SHOW DEBUGGING IPV OSPF

show debugging ipv6 ospf

Overview Use this command in User Exec or Privileged Exec modes to display which OSPFv3
debugging options are currently enabled.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
show debugging ipv6 ospf
Syntax
Mode User Exec and Privileged Exec
awplus#
Example
Output Figure 21-1: Example output from the show debugging ipv6 ospf command
C613-50077-01 REV A
Guide.
show debugging ipv6 ospf
OSPFv3 debugging status:
OSPFv3 all packet detail debugging is on
OSPFv3 all IFSM debugging is on
OSPFv3 all NFSM debugging is on
OSPFv3 all LSA debugging is on
OSPFv3 all NSM debugging is on
OSPFv3 all route calculation debugging is on
OSPFv3 all event debugging is on
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
"Getting Started with AlliedWare Plus" Feature Overview
899