Show Autoboot - Allied Telesis AT-AR3050S Command Reference Manual

F M C
ILE ANAGEMENT OMMANDS

SHOW AUTOBOOT

show autoboot
Overview This command displays the Autoboot configuration and status.
show autoboot
Syntax
Mode Privileged Exec
Example To show the Autoboot configuration and status, use the command:
awplus#
Output Figure 2-5:
awplus#show autoboot
Autoboot configuration
--------------------------------------------------------------------------------
Autoboot status
USB file autoboot.txt exists

Restore information on USB
Autoboot enable in autoboot.txt
Restore release file
(file exists)
Restore configuration file
Figure 2-6:
awplus#show autoboot
Autoboot configuration
--------------------------------------------------------------------------------
Autoboot status
External media source
Related autoboot enable
Commands
create autoboot
show boot
C613-50077-01 REV A
show autoboot
Example output from the show autoboot command
: enabled
: yes
: yes
: AR3050-5.4.5-2.1.rel 
: network_1.cfg (file exists)
Example output from the show autoboot command when an
external media source is not present
: disabled 
: media not found.
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
130