Spanning-Tree Cisco-Interoperability (Mstp) - Allied Telesis AT-AR3050S Command Reference Manual

S T C
PANNING REE OMMANDS
- -
SPANNING TREE CISCO INTEROPERABILITY

spanning-tree cisco-interoperability (MSTP)

Overview Use this command to enable/disable Cisco-interoperability for MSTP.
Use this command for MSTP only.
Syntax spanning-tree cisco-interoperability {enable|disable}
Default If this command is not used, Cisco interoperability is disabled.
Mode Global Configuration
Usage For compatibility with certain Cisco devices, all devices in the switched LAN
running the AlliedWare Plus™ Operating System must have Cisco-interoperability
enabled. When the AlliedWare Plus Operating System is interoperating with Cisco,
the only criteria used to classify a region are the region name and revision level.
VLAN to instance mapping is not used to classify regions when interoperating with
Cisco.
Examples To enable Cisco interoperability on a Layer 2 device:
awplus#
awplus(config)#
To disable Cisco interoperability on a Layer 2 device:
awplus#
awplus(config)#
C613-50077-01 REV A
(MSTP)
Parameter Description
enable
Enable Cisco interoperability for MSTP.
disable
Disable Cisco interoperability for MSTP.
configure terminal
spanning-tree cisco-interoperability enable
configure terminal
spanning-tree cisco-interoperability disable
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
483