Accept-Lifetime - Allied Telesis AT-AR3050S Command Reference Manual

RIP C
OMMANDS
-
ACCEPT LIFETIME

accept-lifetime

Overview Use this command to specify the time period during which the authentication key
on a key chain is received as valid.
Use the no variant of this command to remove a specified time period for an
authentication key on a key chain as set previously with the accept-lifetime
command.
accept-lifetime <start-date>{<end-date>|duration
Syntax
<seconds>|infinite}
no accept-lifetime
Mode Keychain-key Configuration
C613-50077-01 REV A
Parameter Description
<start-date> Specifies the start period - time and date in
the format DD MMM YYYY or MMM DD
YYYY:<hh:mm:ss>{<day> <month> <year> | <month>
<day> <year>}
<hh:mm:ss> Time of the day when accept-lifetime starts, in
<day>
<month>
<year>
<end-date> Specifies the end period - time and date in the
format DD MMM YYYY or MMM DD
YYYY:<hh:mm:ss>{<day> <month> <year> | <month>
<day> <year>}
<hh:mm:ss> Time of the day when lifetime expires, in hours,
<day>
<month>
<year>
<seconds> <1-2147483646> Duration of the key in seconds.
infinite
Never expires.
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
hours, minutes and seconds
<1-31> Specifies the day of the month to start.
Specifies the month of the year to start (the first
three letters of the month, for example, Jan).
<1993-2035> Specifies the year to start.
minutes and seconds.
<1-31> Specifies the day of the month to expire.
Specifies the month of the year to expire (the first
three letters of the month, for example, Feb).
<1993-2035> Specifies the year to expire.
656