Show Ipv6 Ospf - Allied Telesis AT-AR3050S Command Reference Manual

OSPF 3 IP 6 C
V FOR V OMMANDS
6
SHOW IPV OSPF

show ipv6 ospf

Overview Use this command in User Exec or Privileged Exec modes to display general
information about all IPv6 OSPF routing processes, including OSPFv3
Authentication configuration and status information.
Include the process ID parameter with this command to display information about
specified processes.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
show ipv6 ospf
Syntax
show ipv6 ospf <process-id>
Mode User Exec and Privileged Exec
Examples To display general information about all IPv6 OSPF routing processes, use the
command:
awplus#
To display general information about IPv6 OSPF (OSPFv3) routing process P10, use
the command:
awplus#
C613-50077-01 REV A
Guide.
Parameter Description
<process-id>
<0-65535>
The ID of the router process for which information will be displayed.
If this parameter is included, only the information for the specified
routing process is displayed.
show ipv6 ospf
show ipv6 ospf P10
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
"Getting Started with AlliedWare Plus" Feature Overview
900