Platform Load-Balancing - Allied Telesis AT-AR3050S Command Reference Manual

L A C
INK GGREGATION OMMANDS
-
PLATFORM LOAD BALANCING

platform load-balancing

Overview This command selects which address fields are used as inputs into the load
balancing algorithm for aggregated links. The output from this algorithm is used
to select which individual path a given packet will traverse within an aggregated
link.
The no variant of this command applies its default setting.
platform load-balancing {src-dst-mac|src-dst-ip}
Syntax
no platform load-balancing
Default The default is src-dst-ip.
Mode Global configuration
Examples To set the load balancing algorithm to include only Layer 2 MAC addresses, enter:
awplus#
awplus(config)#
To set the load balancing algorithm to include only Layer 3 IP addresses and L4
ports, enter:
awplus#
awplus(config)#
Related show platform
Commands
C613-50077-01 REV A
Parameter Description
src-dst-mac
Include the source and destination MAC addresses (Layer 2)
src-dst-ip
Include the source and destination IP addresses (Layer 3) and
UDP/TCP source and destination ports.
If you choose this option, the algorithm will use MAC addresses
to calculate load balancing for Layer 2 and non-IP packets.
configure terminal
platform load-balancing src-dst-mac
configure terminal
platform load-balancing src-dst-ip
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
529