BGP
BGP4+ C
AND
OMMANDS
-
-
BGP AGGREGATE
NEXTHOP
CHECK
bgp aggregate-nexthop-check
Overview
This command affects the operation of the summary-only option on the
aggregate-address command.
This command enables a mode whereby the summary-only option will only
suppress the component routes if those component routes all have the same next
hop. If the routes have different next hops, then they will continue to be advertised
to peers even if the summary-only option is configured. By default this is disabled.
The no variant of this command disables this function.
bgp aggregate-nexthop-check
Syntax
no bgp aggregate-nexthop-check
Default
Disabled by default.
Mode
Global Configuration
awplus#
Example
awplus(config)#
C613-50077-01 REV A
configure terminal
bgp aggregate-nexthop-check
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
945