Show File Systems - Allied Telesis AT-AR3050S Command Reference Manual

F M C
ILE ANAGEMENT OMMANDS

SHOW FILE SYSTEMS

show file systems
Overview This command lists the filesystems and their utilization information where
appropriate.
show file systems
Syntax
Mode Privileged Exec
Examples To display the filesystems, use the command:
awplus#
Output Figure 2-8:

awplus#show file systems

Size(b) Free(b)
-------------------------------------------------------------------
3.6G 3.1G
- -
10.0M 9.9M
436.0K 263.0K
- -
- -
- -
- -
- -
- -
- -
- -
Table 2: Parameters in the output of the show file systems command
C613-50077-01 REV A
show file systems
Example output from the show file systems command
Type Flags Prefixes
flash rw flash:
system rw system:
debug rw debug:
nvs rw nvs:
usbstick rw usb:
sdcard rw card:
fserver rw fserver:
tftp rw tftp:
scp rw scp:
sftp ro sftp:
http ro http:
rsync rw rsync:
Parameter Description
Size (B)
The total memory available to this filesystem. The units are given
Available
after the value and are M for Megabytes or k for kilobytes.
Free (B)
The total memory free within this filesystem. The units are given
after the value and are M for Megabytes or k for kilobytes.
Type
The memory type used for this filesystem; one of:
flash
system
tftp
scp
sftp
http.
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
S/D/V Lcl/Ntwk Avail
static local
virtual local
static local
static local
dynamic local
dynamic local
dynamic network
- network
- network
- network
- network
- network
Y
-
Y
Y
N
N
N
-
-
-
-
-
134