Allied Telesis AT-AR3050S Command Reference Manual page 556

IP A P
DDRESSING AND ROTOCOL
DEBUG IP PACKET INTERFACE
To turn on ARP packet debugging on vlan1, use the command:
Examples
awplus#
To turn on all packet debugging on all interfaces on the device, use the command:
awplus#
To turn on TCP packet debugging on vlan1 and IP address 192.168.2.4, use
the command:
awplus#
To turn off IP packet interface debugging on all interfaces, use the command:
awplus#
To turn off IP packet interface debugging on interface vlan2, use the command:
awplus#
Related no debug all
Commands
show debugging ip dns forwarding
tcpdump
terminal monitor
undebug ip packet interface
C613-50077-01 REV A
C
OMMANDS
debug ip packet interface vlan1 arp
debug ip packet interface all
debug ip packet interface vlan1 address 192.168.2.4 tcp
no debug ip packet interface
no debug ip packet interface vlan2
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
556