Allied Telesis AT-AR3050S Command Reference Manual page 147

F M C
ILE ANAGEMENT OMMANDS
-
SHOW RUNNING CONFIG INTERFACE
Mode Privileged Exec and Global Configuration
Examples To display the current running configuration of your device for ports 1 to 4, use the
command:
awplus#
To display the current running configuration of a device for VLAN 1, use the
command:
awplus#
To display the current running configuration of a device for VLANs 1 and 3-5, use
the command:
awplus#
To display the current OSPF configuration of your device for ports 1 to 6, use the
command:
awplus#
Output Figure 2-17: Example output from a show running-config interface port1.0.2
C613-50077-01 REV A
Parameter
rstp
stp
show running-config interface port1.0.1-port1.0.4
show running-config interface vlan1
show running-config interface vlan1,vlan3-vlan5
show running-config interface port1.0.1-port1.0.6 ospf
command
awplus#sh running-config interface port1.0.2
!
interface port1.0.2
switchport
switchport mode access
!
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Description
Displays running configuration for RSTP (Rapid Spanning
Tree Protocol) for the specified interfaces.
Displays running configuration for STP (Spanning Tree
Protocol) for the specified interfaces.
147